Probando, probando

Esto es respecto al equipo que tengo así que cada uno se lo ha de probar con lo suyo, la manera mas fácil es hacer un dmesg en una Term por ejemplo:

[ximo@nunbsd-6836] ~% dmesg
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-RELEASE-p4 #0: Tue Aug 18 15:15:36 UTC 2015
    root@amd64-builder.pcbsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "vga".
CPU: Intel(R) Atom(TM) CPU N450   @ 1.66GHz (1662.54-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x106ca  Family=0x6  Model=0x1c  Stepping=10
  Features=0xbfe9fbff
  Features2=0x40e39d
  AMD Features=0x20100800
  AMD Features2=0x1
  TSC: P-state invariant, performance statistics
real memory  = 2137653248 (2038 MB)
avail memory = 2036314112 (1941 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP/HT): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 irqs 0-23 on motherboard
random: initialized
module_register_init: MOD_LOAD (vesa, 0xffffffff80db8eb0, 0) error 19
kbd1 at kbdmux0
cryptosoft0: on motherboard
aesni0: No AESNI support.
acpi0: on motherboard
acpi0: Power Button (fixed)
cpu0: on acpi0
cpu1: on acpi0
attimer0: port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit 3.579545mhz="" at="" timer=""> port 0x808-0x80b on acpi0
acpi_ec0: port 0x62,0x66 on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
vgapci0: port 0xdc00-0xdc07 mem 0xfe980000-0xfe9fffff,0xd0000000-0xdfffffff,0xfe800000-0xfe8fffff irq 16 at device 2.0 on pci0
agp0: on vgapci0
agp0: aperture size is 256M, detected 8188k stolen memory
vgapci0: Boot video device
vgapci1: mem 0xfe780000-0xfe7fffff at device 2.1 on pci0
hdac0: mem 0xfe978000-0xfe97bfff irq 16 at device 27.0 on pci0
pcib1: irq 16 at device 28.0 on pci0
pci1: on pcib1
pcib2: irq 17 at device 28.1 on pci0
pci2: on pcib2
ath0: mem 0xfeaf0000-0xfeafffff irq 17 at device 0.0 on pci2
[ath] AR9285 Main LNA config: LNA2
[ath] AR9285 Alt LNA config: LNA1
[ath] LNA diversity enabled, Diversity enabled
[ath] Enabling diversity for Kite
ath0: [HT] enabling HT modes
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9285 mac 192.2 RF5133 phy 14.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
pcib3: irq 18 at device 28.2 on pci0
pci3: on pcib3
alc0: port 0xec00-0xec7f mem 0xfebc0000-0xfebfffff irq 18 at device 0.0 on pci3
alc0: 15872 Tx FIFO, 15360 Rx FIFO
alc0: Using 1 MSI message(s).
miibus0: on alc0
atphy0: PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
alc0: Using defaults for TSO: 65518/35/2048
alc0: Ethernet address: 90:fb:a6:83:8c:c0
uhci0: port 0xd880-0xd89f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: port 0xd800-0xd81f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: port 0xd480-0xd49f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: mem 0xfe977c00-0xfe977fff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib4: at device 30.0 on pci0
pci4: on pcib4
isab0: at device 31.0 on pci0
isa0: on isab0
atapci0: port 0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f mem 0xfe977800-0xfe977bff irq 19 at device 31.2 on pci0
ata2: at channel 0 on atapci0
ata3: at channel 1 on atapci0
acpi_button0: on acpi0
acpi_button1: on acpi0
acpi_lid0: on acpi0
acpi_acad0: on acpi0
battery0: on acpi0
atkbdc0: port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
ppc0: cannot reserve I/O port range
est0: on cpu0
est1: on cpu1
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: at cad 0 on hdac0
hdaa0: at nid 1 on hdacc0
pcm0: at nid 20,21 and 24 on hdaa0
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: at usbus0
uhub0: on usbus0
ugen1.1: at usbus1
uhub1: on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen2.1: at usbus2
uhub2: on usbus2
ugen3.1: at usbus3
uhub3: on usbus3
usbus4: 480Mbps High Speed USB v2.0
ugen4.1: at usbus4
uhub4: on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: ATA8-ACS SATA 2.x device
ada0: Serial Number WD-WX70A5997073
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
Root mount waiting for: usbus4
ugen4.2: at usbus4
umass0: on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0xc100
umass0:2:0:-1: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: Removable Direct Access SPC-2 SCSI device
da0: Serial Number D48564BBD26FCF41BC3B28E7
da0: 40.000MB/s transfers
da0: 29587MB (60594432 512 byte sectors: 255H 63S/T 3771C)
da0: quirks=0x3
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
Trying to mount root from zfs:tank/ROOT/10.2-RELEASE-p9-up-20151106_184110 []...
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
ugen2.2: at usbus2
ukbd0: on usbus2
kbd2 at ukbd0
ums0: on usbus2
ums0: 5 buttons and [XYZT] coordinates ID=1
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
ugen0.2: at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
GEOM_ELI: Device label/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
Cuse4BSD v0.1.36 @ /dev/cuse
acpi_video0: on vgapci0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
wlan0: Ethernet address: f0:7b:cb:45:b8:5f
wlan0: wlan_clone_create: reject, not an 802.11 device
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
info: [drm] Initialized drm 1.1.0 20060810
drmn0: on vgapci0
iicbus0: on iicbb0 addr 0xff
iic0: on iicbus0
iic1: on iicbus1
iicbus2: on iicbb1 addr 0x0
iic2: on iicbus2
iic3: on iicbus3
iicbus4: on iicbb2 addr 0x0
iic4: on iicbus4
iic5: on iicbus5
iicbus6: on iicbb3 addr 0x0
iic6: on iicbus6
iic7: on iicbus7
iicbus8: on iicbb4 addr 0x0
iic8: on iicbus8
iic9: on iicbus9
iicbus10: on iicbb5 addr 0x0
iic10: on iicbus10
iic11: on iicbus11
iicbus12: on iicbb6 addr 0x0
iic12: on iicbus12
iic13: on iicbus13
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drmn0: taking over the fictitious range 0xd0000000-0xe0000000
info: [drm] initialized overlay support
info: [drm] Connector LVDS-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.LVDS-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.VGA-1
info: [drm]   - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
pid 5266 (pc-wificonfig), uid 0: exited on signal 11
uhub_reattach_port: giving up port reset - device vanished
usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
ugen0.2: at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
wlan0: link state changed to UP
sonewconn: pcb 0xfffff800284f0000: Listen queue overflow: 8 already in queue awaiting acceptance (1 occurrences)
uhub_reattach_port: giving up port reset - device vanished
wlan0: link state changed to DOWN
wlan0: link state changed to UP
[ximo@nunbsd-6836] ~%

En este caso he intentado probar una tarjeta de red USB con chipset Zydas que en releases anteriores funcionaba y ahora parece que no, lo mismo me pasa con una con chipset ralink deben de estar pasadas de moda esto lo hago porque con la atheros que tengo no se cuelga tanto pero se cuelga, lo mismo la tarjeta gráfica pero eso es cada uno lo que tenemos y que nos tenemos que quejar a los entendidos o comprarnos un equipo nuevo.

[ximo@nunbsd-6836] ~% dmesg
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-RELEASE-p4 #0: Tue Aug 18 15:15:36 UTC 2015
    root@amd64-builder.pcbsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "vga".
CPU: Intel(R) Atom(TM) CPU N450   @ 1.66GHz (1662.54-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x106ca  Family=0x6  Model=0x1c  Stepping=10
  Features=0xbfe9fbff
  Features2=0x40e39d
  AMD Features=0x20100800
  AMD Features2=0x1
  TSC: P-state invariant, performance statistics
real memory  = 2137653248 (2038 MB)
avail memory = 2036314112 (1941 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP/HT): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 irqs 0-23 on motherboard
random: initialized
module_register_init: MOD_LOAD (vesa, 0xffffffff80db8eb0, 0) error 19
kbd1 at kbdmux0
cryptosoft0: on motherboard
aesni0: No AESNI support.
acpi0: on motherboard
acpi0: Power Button (fixed)
cpu0: on acpi0
cpu1: on acpi0
attimer0: port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit 3.579545mhz="" at="" timer=""> port 0x808-0x80b on acpi0
acpi_ec0: port 0x62,0x66 on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
vgapci0: port 0xdc00-0xdc07 mem 0xfe980000-0xfe9fffff,0xd0000000-0xdfffffff,0xfe800000-0xfe8fffff irq 16 at device 2.0 on pci0
agp0: on vgapci0
agp0: aperture size is 256M, detected 8188k stolen memory
vgapci0: Boot video device
vgapci1: mem 0xfe780000-0xfe7fffff at device 2.1 on pci0
hdac0: mem 0xfe978000-0xfe97bfff irq 16 at device 27.0 on pci0
pcib1: irq 16 at device 28.0 on pci0
pci1: on pcib1
pcib2: irq 17 at device 28.1 on pci0
pci2: on pcib2
ath0: mem 0xfeaf0000-0xfeafffff irq 17 at device 0.0 on pci2
[ath] AR9285 Main LNA config: LNA2
[ath] AR9285 Alt LNA config: LNA1
[ath] LNA diversity enabled, Diversity enabled
[ath] Enabling diversity for Kite
ath0: [HT] enabling HT modes
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9285 mac 192.2 RF5133 phy 14.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
pcib3: irq 18 at device 28.2 on pci0
pci3: on pcib3
alc0: port 0xec00-0xec7f mem 0xfebc0000-0xfebfffff irq 18 at device 0.0 on pci3
alc0: 15872 Tx FIFO, 15360 Rx FIFO
alc0: Using 1 MSI message(s).
miibus0: on alc0
atphy0: PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
alc0: Using defaults for TSO: 65518/35/2048
alc0: Ethernet address: 90:fb:a6:83:8c:c0
uhci0: port 0xd880-0xd89f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: port 0xd800-0xd81f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: port 0xd480-0xd49f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: mem 0xfe977c00-0xfe977fff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib4: at device 30.0 on pci0
pci4: on pcib4
isab0: at device 31.0 on pci0
isa0: on isab0
atapci0: port 0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f mem 0xfe977800-0xfe977bff irq 19 at device 31.2 on pci0
ata2: at channel 0 on atapci0
ata3: at channel 1 on atapci0
acpi_button0: on acpi0
acpi_button1: on acpi0
acpi_lid0: on acpi0
acpi_acad0: on acpi0
battery0: on acpi0
atkbdc0: port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
ppc0: cannot reserve I/O port range
est0: on cpu0
est1: on cpu1
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: at cad 0 on hdac0
hdaa0: at nid 1 on hdacc0
pcm0: at nid 20,21 and 24 on hdaa0
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: at usbus0
uhub0: on usbus0
ugen1.1: at usbus1
uhub1: on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen2.1: at usbus2
uhub2: on usbus2
ugen3.1: at usbus3
uhub3: on usbus3
usbus4: 480Mbps High Speed USB v2.0
ugen4.1: at usbus4
uhub4: on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: ATA8-ACS SATA 2.x device
ada0: Serial Number WD-WX70A5997073
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
ugen4.2: at usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
ugen4.3: at usbus4
umass0: on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0xc100
umass0:2:0:-1: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: Removable Direct Access SPC-2 SCSI device
da0: Serial Number D48564BBD26FCF41BC3B28E7
da0: 40.000MB/s transfers
da0: 29587MB (60594432 512 byte sectors: 255H 63S/T 3771C)
da0: quirks=0x3
Trying to mount root from zfs:tank/ROOT/10.2-RELEASE-p9-up-20151106_184110 []...
ugen2.2: at usbus2
ukbd0: on usbus2
kbd2 at ukbd0
ums0: on usbus2
ums0: 5 buttons and [XYZT] coordinates ID=1
GEOM_ELI: Device label/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
Cuse4BSD v0.1.36 @ /dev/cuse
acpi_video0: on vgapci0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
wlan0: Ethernet address: f0:7b:cb:45:b8:5f
wlan0: wlan_clone_create: reject, not an 802.11 device
rum0: on usbus4
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528
wlan2: Ethernet address: 00:xx:xx:xx:xx:xx
rum0: need to implement rum_update_mcast
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
info: [drm] Initialized drm 1.1.0 20060810
drmn0: on vgapci0
iicbus0: on iicbb0 addr 0xff
iic0: on iicbus0
iic1: on iicbus1
iicbus2: on iicbb1 addr 0x0
iic2: on iicbus2
iic3: on iicbus3
iicbus4: on iicbb2 addr 0x0
iic4: on iicbus4
iic5: on iicbus5
iicbus6: on iicbb3 addr 0x0
iic6: on iicbus6
iic7: on iicbus7
iicbus8: on iicbb4 addr 0x0
iic8: on iicbus8
iic9: on iicbus9
iicbus10: on iicbb5 addr 0x0
iic10: on iicbus10
iic11: on iicbus11
iicbus12: on iicbb6 addr 0x0
iic12: on iicbus12
iic13: on iicbus13
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drmn0: taking over the fictitious range 0xd0000000-0xe0000000
info: [drm] initialized overlay support
info: [drm] Connector LVDS-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.LVDS-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.VGA-1
info: [drm]   - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
wlan2: link state changed to UP
wlan2: link state changed to DOWN
ifa_del_loopback_route: deletion failed: 48
wlan0: Ethernet address: 00:xx:xx:xx:xx:xx
wlan0: wlan_clone_create: reject, not an 802.11 device
wlan0: wlan_clone_create: reject, not an 802.11 device
wlan2: Ethernet address: 00:xx:xx:xx:xx:xx
pid 5077 (pc-mounttray), uid 1001: exited on signal 11
pid 1732 (PCDM-session), uid 0: exited on signal 11
pid 10573 (pc-mounttray), uid 1001: exited on signal 11
ifa_del_loopback_route: deletion failed: 48
wlan0: Ethernet address: 00:xx:xx:xx:xx:xx
wlan0: wlan_clone_create: reject, not an 802.11 device
wlan0: wlan_clone_create: reject, not an 802.11 device
wlan2: Ethernet address:00:xx:xx:xx:xx:xx
wlan2: link state changed to UP
wlan2: link state changed to DOWN
wlan0: link state changed to UP
ifa_del_loopback_route: deletion failed: 48
wlan0: link state changed to DOWN
wlan0: Ethernet address: 00:xx:xx:xx:xx:xx
wlan0: wlan_clone_create: reject, not an 802.11 device
wlan0: link state changed to UP
wlan0: wlan_clone_create: reject, not an 802.11 device
wlan2: Ethernet address: 00:xx:xx:xx:xx:xx
wlan2: link state changed to UP
wlan2: link state changed to DOWN

Y el otro error que ya he dicho es este:

GEOM_ELI: Device label/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
Cuse4BSD v0.1.36 @ /dev/cuse
acpi_video0: on vgapci0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
wlan0: Ethernet address: f0:7b:cb:45:b8:5f
wlan0: wlan_clone_create: reject, not an 802.11 device
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
info: [drm] Initialized drm 1.1.0 20060810
drmn0: on vgapci0
iicbus0: on iicbb0 addr 0xff
iic0: on iicbus0
iic1: on iicbus1
iicbus2: on iicbb1 addr 0x0
iic2: on iicbus2
iic3: on iicbus3
iicbus4: on iicbb2 addr 0x0
iic4: on iicbus4
iic5: on iicbus5
iicbus6: on iicbb3 addr 0x0
iic6: on iicbus6
iic7: on iicbus7
iicbus8: on iicbb4 addr 0x0
iic8: on iicbus8
iic9: on iicbus9
iicbus10: on iicbb5 addr 0x0
iic10: on iicbus10
iic11: on iicbus11
iicbus12: on iicbb6 addr 0x0
iic12: on iicbus12
iic13: on iicbus13
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drmn0: taking over the fictitious range 0xd0000000-0xe0000000
info: [drm] initialized overlay support
info: [drm] Connector LVDS-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.LVDS-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.VGA-1
info: [drm]   - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
pid 1708 (pc-mounttray), uid 1001: exited on signal 11
ath0: bb hang detected (0x4)
ath0: bb hang detected (0x4), resetting
pid 1607 (PCDM-session), uid 0: exited on signal 11
pid 14177 (pc-mounttray), uid 1001: exited on signal 11
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid8:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
ath0: bb hang detected (0x4)
ath0: bb hang detected (0x4), resetting
ath0: bb hang detected (0x4), resetting
ath0: bb hang detected (0x4), resetting
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 63874, size: 4096
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 63874, size: 4096
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 5149, size: 4096
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 63874, size: 4096
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 65092, size: 4096

Lo de la tarjeta gráfica sospecho que es cuando uso WINE creo recordar que en MAC hay un programa previo para poder usar las X de todas formas esta claro que si mi tarjeta está emulando a otra puede pasar cualquier cosa en el milagro consiguiente de que funcione.

Técnicamente hablando si por ejemplo estáis en foros y queréis dar información para consultar vuestro problema de hardware lo mejor es  abrir el PC-BSD Control Panel y a continuación abrir el PC-BSD System Configuration y en la primera pestaña abajo veréis un botón que pone generate lo pincháis y os saldrá un diagóstico de vuestra máquina con PC-BSD el systemDiagnostic aunque lo enviéis a gente que se supone que tenemos confianza hay datos particulares que es mejor marcar con XX como números de IP, de tarjeta de conexión o BSSID si de caso y cosas así.